®
PlateMate Installation
ITEM
COMPONENT QTY
1.
Back Plate
x1
2.
Knurled Nuts
x2
3.
Screws
x2
4.
Velcro Straps
x3
• Please read instructions carefully before installation.
• Check the contents of kit. Contact your YAKIMA
dealer if any parts appear missing or damaged.
• Place these instructions in the vehicle’s glove box
after installation is complete.
FIRST TIME INSTALLATION
INSERT VELCRO STRAPS
Take x2 Velcro Straps and
thread through the front of
PlateMate as shown.
1
Pull Velcro Straps completely
through as shown.
1
2
3
4
NOTE:
Strap configuration
shown is for Yakima
HoldUp.
PlateMate can
also be attached
to other carriers
using the other slot
combinations.
KIT CONTENTS
6100003124-Rev2
POSITION NUMBER PLATE
Position your number plate onto the
PlateMate. Using the x2 Screws,
line up the Screws through slots
in your number plate with the
appropriate holes in PlateMate.
2
SECURE NUMBER PLATE
Turn PlateMate over carefully
ensuring that the screws don’t
fall out. Spin the Knurled
Nuts onto screw threads.
Finger tighten nuts until number
plate is secure on PlateMate.
3
6100003124-Rev2
