background image

1033569C-1/12

CROSSBAR SPREAD

*CROSSBAR SPREAD

Your 

crossbar spread

 is 

the distance between 

the crossbars.

Round Bar & 

Square Bar

Min. - Max. 

Crossbar 

Spread*

32" - 50"

81cm - 127cm

Limits

35 lbs./bike

16 kg/bike

1 or more 

bikes

Type of 

Rack

LOCking SkEwER (1x)

whEEL tRAy (1x)

COvER (1x)

hEx kEy (1x)

SnAP AROunD (1x)

CARRiAgE BOLt (1x)

wREnCh (1x)

POD SCREwS (3x)

POD (1x)

tuBE SLEEvE (1x)

Mighty MOunt (1x)

      

IMPORTANT WARNING

it  iS  CRitiCAL  thAt  ALL  yAkiMA  RACkS  AnD  ACCESSORiES  BE  PROPERLy  AnD  SECuRELy  AttAChED  tO  yOuR  vEhiCLE.  iMPROPER    AttAChMEnt  COuLD  RESuLt  in  An 

AutOMOBiLE ACCiDEnt, AnD COuLD CAuSE SERiOuS BODiLy inJuRy OR DEAth tO yOu OR tO OthERS. yOu ARE RESPOnSiBLE FOR SECuRing thE RACkS AnD ACCESSORiES 

tO yOuR CAR, ChECking thE  AttAChMEntS PRiOR tO uSE, AnD PERiODiCALLy inSPECting  thE PRODuCtS FOR ADJuStMEnt, wEAR, AnD DAMAgE. thEREFORE, yOu MuSt READ AnD 
unDERStAnD ALL OF thE inStRuCtiOnS AnD CAutiOnS SuPPLiED with yOuR yAkiMA PRODuCt PRiOR tO inStALLAtiOn OR uSE. iF yOu DO nOt unDERStAnD ALL OF thE inStRuCtiOnS 
AnD CAutiOnS, OR iF yOu hAvE nO MEChAniCAL ExPERiEnCE AnD ARE nOt thOROughLy FAMiLiAR with thE inStALLAtiOn PROCEDuRES, yOu ShOuLD hAvE thE PRODuCt inStALLED By 
A PROFESSiOnAL inStALLER.

Load

DO nOt ExCEED RACk wEight LiMitS!

Part #1033569 Rev.C

Forks with 

Safety Tabs

Designed for forks 

with safety tabs.

Off-road driving is 

not recommended.

Summary of Contents for BOA













Reviews: