Gesture and Motion Evaluation Kits (Digital) USEQMSK_____00
The above information is believed to be correct but does not purport to be all inclusive and must be used only as a guide.
© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard
Fort Lauderdale, FL
33301 USA • 954-766-2800 • www.kemet.com
5
3.4
Connecting the SMD Gesture and Motion Sensing Evaluation Kit
Connect the USB cable to the kit and Windows PC.
You may see a message suggesting you are required to install a device driver. Follow the on
screen instructions and download a driver from Windows Update or install from the software
package provided.
4
SOFTWARE USER GUIDE
4.1
Starting the Software
Double clicking on the .exe file will open the application. This will open the window shown
below:
Figure 3 - Software Main Page
4.2
Connecting Software to the Demo Kit
To connect to the demo kit, select
Device
and then
Connect to Device
.
Figure 2
– Device Connection
This will open a window with all available devices on COM ports.
