19
Preparation
Preparing an Internet Environment
When the port registration is complete, the communication
status will be checked again.
When checking completes, the “OK” or “NG” will appear on the
right side of each port name.
7
When “OK” appears for each port, click
[Close]
The “WIRES ID Activation” window will appear again.
Caution
If “NG” still appears, ports cannot be opened using the WIRES-X
software.
Tip
To remotely control a node station using the remote monitor function, the TCP port 46190 (default value) must be open. For details, refer to “Operating the
WIRES-X software remotely” (page 48).
Taking security measures
Make sure to take security measures against interception and unauthorized access using a security service provided by the internet
provider or a firewall program for the router and PC.
