Yaesu VX-177, Operating Manual, Page: 84 / 88

VX-177 O
PERATING
M
ANUAL
82
Set Mode Item 51
[
WID.NAR
]
Function : Select Wide (±5 kHz) or Narrow (±2.5 kHz) TX Deviation.
Available Values : WIDE/NARROW
Default : WIDE
Note: If “Narrow” is selected, the receiver audio level is increased slightly to compensate
for the reduced deviation. The receiver IF filter bandwidth is not changed via this setting.
Set Mode Item 52
[
EAI
]
Function : Enables/Disables the Emergency Automatic ID (EAI) Feature.
Available Values :
INT. 1M - INT.10M, INT.15M, INT.20M, INT.30M, INT.40M, INT. 50M,
CON. 1M - CON.10M, CON.15M, CON.20M, CON.30M, CON.40M, CON. 50M, and OFF
Default : OFF
The following Set Mode Items will appears when the optional FTD-7 DTMF Paging
Unit is installed.
Set Mode Item 53
[
ANI
]
Function : Enables/Disables the ANI function.
Available Values : ANI.OFF/ANI. ON
Default : ANI. OFF
Set Mode Item 54
[
ANI.WRT
]
Function : Program the ANI Identifier.
See page 59 for details.
Set Mode Item 55
[
PAGER
]
Function : Enables/Disables the ANI function.
Available Values : PAG.OFF/PAG. ON
Default : PAG. OFF
Set Mode Item 56
[
PAG.COD
]
Function : Setting the Pager Code for the DTMF Pager.
See page 55 for details.
Set Mode Item 57
[
PAG.ABK
]
Function : Enables/Disables the Answer Back function of the DTMF Pager.
Available Values : ABK.OFF/ABK. ON
Default : ABK. OFF
S
ET
(
M
ENU
)
M
ODE