Yaesu VX-120 Series, Technical Supplement

Page: 2 / 32

2
Specifications
General
Frequency Ranges : RX 137 - 174 MHz
TX 144 - 146 (148) MHz
Channel Steps : 5/10/12.5/15/20/25/50/100 kHz
Frequency Stability : ±5 ppm @ 14° to 140° F (–10° to +60° C)
Repeater Shift : ±600 kHz
Emission Type : F2 , F3
Antenna Impedance : 50
Ω
Supply Voltage : Nominal: 7.2 V DC
(Negative Ground) Operating: 6.0 ~ 16.0 V DC (EXT DC Jack)
11.0 ~ 16.0 V DC (EXT DC Jack with Charging)
Current Consumption : 125 mA (Receive, 200 mW output)
(Approx. @7.2 V) 45 mA (Standby, Saver Off)
20.5 mA (Standby, Saver On)
8 mA (Auto Power Off)
1.5 A (5 W TX)
Operating Temperature : –4° to 140° F (–20 °C to +60 °C)
Case Size : 2.36” (W) x 4.72” (H) x 1.26” (D) (60 x 120 x 32 mm)
(W/O knob, antenna, & belt clip)
Weight : 13.8 Oz (390 g) with FNB-83, antenna, and belt clip
Transmitter
RF Power Output : 5.0 W (High) / 2.0 W (Middle) / 0.5 W (Low) (@7.2 V)
Modulation Type : Variable Reactance F2D, F3E
Maximum Deviation : ±5.0 kHz (F2D, F3E)
Spurious Emission : At least 60 dB down (@ High and Middle power)
At least 40 dB down (@ Low power)
Microphone Impedance : 2 k
Ω
Receiver
Circuit Type : Double-Conversion Superheterodyne
Intermediate Frequencies : 1st: 21.7 MHz
2nd: 450 kHz
Sensitivity : 0.2 µV for 12 dB SINAD (137-140 MHz)
0.16 µV for 12 dB SINAD (140-150 MHz)
0.2 µV for 12 dB SINAD (150-174 MHz)
Selectivity : 12 kHz/35 kHz (–6 dB /–60 dB)
AF Output : 700 mW @ 16
Ω
for 10 % THD (Internal Speaker)
(@ 7.5 V) 400 mW @ 8
Ω
for 10 % THD (EXT SP Jack)
Specifications are subject to change without notice, and are guaranteed within the 144 MHz amateur band only. Fre-
quency ranges will vary according to transceiver version; check with your dealer.