manualshive.com logo in svg

Yaesu SCU-LAN10, Operation Manual, Page: 38 / 39

Share
Download
Yaesu SCU-LAN10 Operation Manual Download Page 38

38

Help

Installation Manual (Japanese)

:  Open the Installation Manual (Japanese)

Operation Manual (Japanese)

: 

Open the Operation Manual (Japanese)

Installation Manual (English)

: 

Open the Installation Manual (English)

Operation Manual (English)

: 

Open the Operation Manual (English) (This Manual)

About

: 

Displays information about this software.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against harmful interference in a residential installation.  This equipment 

generates, uses, and can radiate radio frequency energy; and, if not installed and used in accordance with the instructions, may 

cause harmful interference to radio communications.  However, there is no guarantee that interference will not occur in a particular 

installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment 

off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

r

  Reorient or relocate the receiving antenna.

r

  Increase the separation between the equipment and receiver.

r

  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

r

  Consult the dealer or an experienced radio/TV technician for help.

Summary of Contents for SCU-LAN10








































Reviews:

No comments