12
Switch between Dual receive and Scope operation with one touch
Dual receive and Scope operations are switched each time the
key is pressed.
The center frequency or memory channel can be changed by turning the
DIAL
knob.
In VFO Mode, press and then turn the
DIAL
knob to select the frequency in
1MHz increments.
In Memory Mode, press and then turn the
DIAL
knob to select in 10 channel steps.
Dual Receive
Scope Screen
Dual Receive
•
In Dual receive, both Main and Sub frequencies are received at the same time,
and the volume is adjusted with each
VOL/SQL
knob.
Switch the Main and Sub frequencies with the
key.
Scope Screen
•
Scope operation allows monitoring other frequencies on the Sub-display while
receiving the Main frequency.
The status (strengths) of the signals in the upper and lower frequency channels
(61CH or 31CH), or memory channels (21CH or 11CH) are displayed on the
Scope Bar graph, centered on the current operating channel.
Change the number of channels displayed during scope operation
•
Press and hold the
FUNC
knob
Touch [
4 BAND SCOPE
]
Rotate the
FUNC
knob to select the setting.
