Yaesu FTM-500DR, Advance Manual

Page: 23 / 74

23
Functions used as needed
Timer / Clock function
1. Press and hold the FUNC knob

[ 7 DISPLAY MODE ]

Press the FUNC knob
2. Rotate the FUNC knob to select [ TIMER/CLOCK ] then press the FUNC knob.
The Clock screen will be displayed.
3. Press the SUB DIAL knob.
4. The following functions can be selected each time the SUB DIAL knob is pressed.
Clock screen / Lap timer screen / Countdown timer screen
5. Press the [ BACK ] key twice to return to the original screen.
Using the lap timer
1. In the Timer / Clock function screen, press the SUB
DIAL knob.
2. Press the SUB DIAL knob several times to display the
Lap timer screen.
z
Start measurement
1. Rotate the SUB DIAL knob to select [ START ] then
press the SUB DIAL knob.
The timer will start.
z
Measure lap time
1. Rotate the SUB DIAL knob during measurement and
select [ LAP ].
2. Each time the SUB DIAL knob is pressed, the lap time
is stored.
Up to 99 lap times can be saved in the memory.
z
Call lap time
1. Rotate the SUB DIAL knob to select [ RECALL ] then press the SUB DIAL knob.
The lap time and split time are displayed.
2. When there are multiple lap times, rotate the SUB DIAL knob to select [
p
] or [
q
] then
press the SUB DIAL knob to switch between the lap times.
z
Stop measurement
1. Rotate the SUB DIAL knob to select [ STOP ] then press the SUB DIAL knob.
The timer will stop.
z
Clear the measurement result
1. When measurement is stopped, turn the SUB DIAL knob to select [ RESET ] then
press the SUB DIAL knob.
All measurement results will be erased.