182
Customize Menu Settings and User Preferences
Using the Set-up Menu
4
Touch
[1 SUB BAND MUTE]
to select OFF/ON
The setting will switch between “ON” and “OFF” each
time the symbol is touched.
OFF: The sub-band audio will not be muted when a
signal is received on the main band.
ON: The sub-band audio will be muted when a signal
is received on the main band.
Tip
Factory default value: OFF
((
1
014/#.
/+%)#+0
57$$#0&/76'
#7&+1
Ჹ
Ჺ
5
Press for one second or longer
The sub-band mute will be set and the display will return to the previous screen.
Setting the sensitivity of the microphone
The sensitivity (gain) of the microphone can be adjusted.
Refer to “Adjusting the sensitivity of the microphone” ( P.50) for details.
Memory channel settings
Setting the display method for the memory tag
The display format for the name and frequency assigned to a memory can be selected
for each channel.
Refer to “Changing the method of the memory tag display” ( P.71) for details.
Setting the memory scan method
The memory scan can be set to scan for all memory channels or only specified memory
channels.
Refer to “Selecting the scanning method” ( P.79) for details.
Tone signal settings
Setting the squelch tone frequency (CTCSS)
The tone frequency can be set. Refer to “Setting the tone frequency” ( P.106) for
details.
Setting the DCS code
The DCS code can be set. Refer to “Setting the DCS code” ( P.108) for details.
Setting the transmission method of the DTMF code
The transmission method of the registered DTMF code can be set.
Refer to “Transmitting the registered DTMF code” ( P.117) for details.
Registering the DTMF code
Telephone numbers used when connecting to a public line from a phone patch can be
registered using a DTMF code up to a maximum of 16 digits.
Refer to “Registering the DTMF code” ( P.116) for details.
Summary of Contents for FTM-400XDR/DE
Page 218: ...218 Appendix Note...
