20
Before Using
Name and Function of Each Component
Change the display mode
The display mode will switch in the sequence each time is pressed.
Frequency display screen→Compass/Lat&Lon display screen→Altitude display
screen*→Timer/Clock screen*→GPS screen*
* This screen will be displayed when
[DISPLAY]
→
[1 DISPLAY SELECT]
is set to
“ON” in the set-up menu.
●
Compass screen
The direction of travel of your own station and direction coordinate of the received
station are displayed in the compass screen.
%1/2#55
Ჸ
1
8(
Ჹ Ჽ Ჸ
᳁
Ჸ
&+56#0%'
MO
/ ;
; 4
. Ჺ
. Ჹ
/'/14;
0
9
'
5
᳂
,# <4. ᳂
Ჹ
COMPASS
Displays the compass settings. There
are two settings, “Heading Up” where the
direction of travel is on top, and “North Up”
where North is always on top.
Refer to “Change the Compass Settings” (
P.94) for details.
DISTANCE
When a saved position information is
recalled, the distance from the current
position is displayed.
[YR]
When this symbol is touched, the position
of the partner station that is received is
displayed in the compass (when the position
information is included in the signal), and
the symbol is shown in orange.
[MY]
When this symbol is touched, the direction of travel of your own station is
displayed in the compass, and this symbol is displayed in orange.
[MEMORY]
When this symbol is touched, the position information being displayed is
saved in the memory.
[
]
When this symbol is touched while the display is green, the position
information saved in the memory under the tag “
” is displayed.
When this symbol is touched while the display is blinking, the position
information displayed in the compass will be saved in the memory under
the tag “
”.
[L1]
When this symbol is touched while the display is green, the position
information saved in the memory under the tag “L1” is displayed.
When this symbol is touched while the display is blinking, the position
information displayed in the compass will be saved in the memory under
the tag “L1”.
[L2]
When this symbol is touched while the display is green, the position
information saved in the memory under the tag “L2” is displayed.
When this symbol is touched while the display is blinking, the position
information displayed in the compass will be saved in the memory under
the tag “L2”.
