manualshive.com logo in svg

Yaesu FTM-3100E, Advance Manual, Page: 32 / 33

Share
Download
Yaesu FTM-3100E Advance Manual Download Page 32

32

Menu Selection Details

FTM-3100R/E Advance Manual

40  TS SPEED

Function:

 Selects the Tone Search or DCS Search Scanner speed.

Available Values:

 FAST / SLOW

Default:

 FAST

41  VER DISP

Function:

 Displays the transceiver software version.

Available Values:

 CPU

42  WX ALERT

Function:

 Enables/Disables the Weather Alert feature.

Available Values:

 ON / OFF

Default:

 OFF

ON:  The weather alert will be received
OFF:  The weather alert will not be received

43  WX VOL

Function:

 Selects the audio output level of the Weather Alert.

Available Values:

 NOR VOL / MAX VOL

Default:

 NOR VOL

44  W/N DEV

Function:

 Reduction of the Microphone Gain/Deviation and receiver bandwidth.

Available Values:

 WIDE / NARROW

Default:

 WIDE

Copyright 2019

YAESU MUSEN CO., LTD.

All rights reserved.
No portion of this manual may be

reproduced without the permission of

YAESU MUSEN CO., LTD.

YAESU MUSEN CO., LTD.

Tennozu Parkside Building

2-5-8 Higashi-Shinagawa, Shinagawa-ku, Tokyo 140-0002 Japan

YAESU USA

6125 Phyllis Drive, Cypress, CA 90630, U.S.A.

YAESU UK

Unit 12, Sun Valley Business Park, Winnall Close

Winchester, Hampshire, SO23 0LB, U.K.

1901-D

Summary of Contents for FTM-3100E


































Reviews:

No comments