33
Using the Memory
The FTM-300DR/DE incorporates a Large number of memory channels that can register
the operating frequency, communication mode, and other operational information.
•
999 Memory Channels
•
5 Home Channels
•
50 pairs PMS Memory Channels
The operating frequency and other operational information can be registered to each
regular memory channel, home channel, or PMS memory channel:
•
Operating frequency
• Communication Mode
• Frequency Step
• Transmitter output
• Memory tag
• Repeater Shift
• TX/RX DG-ID
• Tone information
• DCS information
• Memory channel skip information
NOTE
Back up the stored contents to a microSD memory card. For details on backing up to a microSD
card.
Writting to memory (There are two ways)
(1) Press [V/M] key to write
1. Set the frequency to write to memory.
2. Press and hold the [
V/M(MW)
] key.
The memory channel list appears.
The lowest available number is selected. To select
another channel, rotate the
DIAL
knob to select the
memory channel number to be written.
•
Rotate the lower
DIAL
knob to fast-forward in
10-channel steps.
For already written memory channels, the writing
frequency is displayed.
3. Press and hold the [
V/M (MW)
] key or press the
DIAL
knob to display a popup. Make sure that [
WRITE
] is
highlighted and press the
DIAL
knob.
If you attempt to register a frequency to a memory
channel that already contains frequency data, “
OVER-
WRITE?
” will appear on the screen. Rotate th
e DIAL
knob to select [
OK
], then press the
DIAL
knob to
overwrite the memory channel.
4. The memory is stored, and the screen returns to the
previous screen.
004
‐ ‐ ‐
.
‐ ‐ ‐ ‐ ‐
ｰ ｰ ｰ ｰ
002
‐ ‐ ‐
.
‐ ‐ ‐ ‐ ‐
ｰ ｰ ｰ ｰ
001 145.000
003
‐ ‐ ‐
.
‐ ‐ ‐ ‐ ‐
ｰ ｰ ｰ ｰ
MEMORY CH LIST
004
‐ ‐ ‐
.
‐ ‐ ‐ ‐ ‐
ｰ ｰ ｰ ｰ
002
‐ ‐ ‐
.
‐ ‐ ‐ ‐ ‐
ｰ ｰ ｰ ｰ
001 145.000
003
‐ ‐ ‐
.
‐ ‐ ‐ ‐ ‐
ｰ ｰ ｰ ｰ
MEMORY CH LIST
