9
Program keys (P1/P2/P3/P4)
The default function settings of the [P1] / [P2] / [P3] / [P4] keys are shown in the table below.
Key
Function
Press
Press and hold
P1*
GM*
GM Function
DG-ID setting screen
P2
HOME
Recalls HOME channel
P3
D_X
Selects communication
mode
Activates the WIRES-X
feature
P4
WX (T-CALL)
WX (T-CALL: European version)
*The function of the [P1] key is fixed.
The functions of the [P2] / [P3] / [P4] keys can be assigned by the following operations:
1. Press and hold the [
F(SETUP)
] key.
2. Rotate the
DIAL
knob to select Set-up menu [
CONFIG
], then press the
DIAL
knob.
3. Rotate the
DIAL
knob to select [
10 MIC PROGRAM KEY
], then press the
DIAL
knob.
4. Rotate the
DIAL
knob to select a key to assign a function [
P2
] / [
P3
] / [
P4
] then press the
DIAL
knob.
5. Rotate the
DIAL
knob to select a function (see the table below) then press the
DIAL
knob.
Function
Description
OFF
(disable the P key)
BAND SCOPE
Turns the band scope function ON/OFF
SCAN
Starts or stops the scanning function
HOME
Recalls the HOME channel
RPT SHIFT
Sets the repeater shift direction
REVERSE
Reverses the transmit and receive frequencies in repeater mode or split memory.
TX POWER
Selects the transmit power output level
SQL OFF
Opens the squelch (SQL off)
T-CALL
Transmits the T-CALL(1750 Hz)
VOICE
Announces the current frequency (requires optional FVS-2)
D_X
Press to select communication mode
Press and hold to activate the WIRES-X feature
WX
Switches operation to the Weather Channel Bank
STN LIST
Displays the APRS function station list
MSG LIST
Displays the message list of the APRS function
REPLY
Enters the APRS function reply message write mode
MSG EDIT
Enters the APRS function message write mode
