61
5 Resetting the APRS
Reset the APRS setting.
1. Press and hold the [
F(SETUP)
] key
[
RESET
]
[
5 APRS RESET
]
2. Press the
DIAL
knob.
The confirmation screen will be displayed.
3. Rotate the
DIAL
knob to select [OK], then press the
DIAL
knob.
Erase all APRS settings and it will restart automatically.
Setup Menu: CLONE
All the data saved on the transceiver directory may be copied (Cloned) to other FTM-
300DR/DE transceivers.
For details, see “Copying the Radio Data to another Transceiver” (page 30).
Setup Menu: CALLSIGN
The call sign ID registered to the transceiver may be changed using the set menu.
1. Press and hold the [
F(SETUP)
] key
[
CALLSIGN
]
2. Press the
DIAL
knob.
The first letter of the call sign ID blinks.
3. Rotate the
DIAL
knob to select the desired letter, then press the
DIAL
knob.
The cursor movers to the right.
• Up to 10 alphanumeric characters including hyphen and slash may be input.
4. Repeat step 3 to complete to inputting the new call sign.
5. Press and hold the
DIAL
knob.
The new call sign is displayed.
6. Press the [
DISP
] key.
Sets the call sign and returns the display to the previously viewed operating screen.
