47
2 DIGITAL
1 Setting the AMS transmission mode
When operating in the AMS function, the transmit mode may be selected:
1. Press and hold the [
F(SETUP)
] key
[
TX/RX
]
[
2 DIGITAL
]
[
1 AMS TX MODE
]
2. Press the
DIAL
knob to select the AMS transmit mode.
AUTO
The RX and TX operating modes are automatically selected
from the four communication modes to match the received
signal.
TX FM FIXED
The RX mode is automatically selected from the four com-
munication modes to match the received signal. The TX
mode is automatically changed to the “FM” mode.
TX DN FIXED
The RX mode is automatically selected from the four com-
munication modes to match the received signal. The TX
mode is automatically changed to the “DN” mode.
The default setting: AUTO
For details, refer to the Operating Manual.
2 Setting the Pop-up Time of the Remote Station Information
Set the time duration to display the remote station information (such as the call sign) on
the LCD.
1. Press and hold the [
F(SETUP)
] key
[
TX/RX
]
[
2 DIGITAL
]
[
2 DIGITAL POP-
UP
]
2. Rotate the
DIAL
knob to select the desired setting.
OFF
The remote station information is not displayed.
2 sec - 60 sec
Set the time duration to display the remote station information.
CONTINUE
The remote station information is continuously displayed.
The default setting: 10 sec
3 Setting to send your own position in digital mode
Set whether to transmit your station position in digital mode.
1. Press and hold the [
F(SETUP)
] key
[
TX/RX
]
[
2 DIGITAL
]
[
3 LOCATION
SERVICE
]
2. Rotate the
DIAL
knob to select the desired setting.
ON
Send the location information of your station.
OFF
Do not send the location information of your station.
The default setting: ON
