29
Voice announcement of the operating frequency
(1) When the voice announcement is set to
The frequency of the operating band will be automatically announced in the following
cases:
• When the VFO mode and memory mode are switched.
• When the operating band is changed.
• The frequency will also be announced when pressing the [
F(SETUP)
] key
[
FVS-2
]
[
VOICE GUIDE
].
• The volume announcement voice is linked to the volume of the operation band.
(2) When the voice announcement is set to “MANUAL”
1. Press the [
F(SETUP)
] key
[
FVS-2
]
2. Rotate the
DIAL
knob to select [
VOICE GUIDE
], then press the
DIAL
knob.
The frequency of the operating band will be announced.
The volume of the announcement voice is linked to the volume of the operation band.
