30
Setting the Skip Band
Set the band selected when the [
BAND
GRP
] key is pressed. By storing frequently used
frequencies in the memory channel before setting the band skip, can be recall the memory
that stores the frequencies of the bands that cannot be selected.
1. Press and hold the [
BAND
GRP
] key in VFO mode.
2. Rotate the DIAL knob to select the band to set and press
the
DIAL
knob.
Or press and hold the [
F menu
] key → [
22 BAND SKIP
]
3. Rotate the
DIAL
knob to set “ON” (selectable) or “OFF”
(not selectable).
4. To return to the normal operation screen from the Function
List, press a key other than the power switch or
PTT
.
Changing the Frequency Step
The
DIAL
knob rotation frequency step may be changed. Normally, use the factory
default setting of “
AUTO
”.
1. Press and hold the [
F
MENU
] key.
2. Rotate the
DIAL
knob to select [
31 STEP
], then press the
DIAL
knob.
3. Rotate the
DIAL
knob to set the frequency step.
4. To return to the normal operation screen from the Function
List, press a key other than the power switch or
PTT
.
Press and hold
• The default setting, of the frequency step is set to “AUTO”, which automatically provides a
suitable frequency step according to the frequency band.
• The frequency steps that can be selected depend on the frequency band.
Change the frequency display color of the operation band
The display color of the frequency of the operation band can be selected from "white",
"blue", and "red".
1. Press and hold the [
F
MENU
] key.
2. Rotate the
DIAL
knob to select [
3 FREQUENCY COLOR
],
then press the
DIAL
knob.
3. Rotate the
DIAL
knob to select the display color.
“
WHITE
”
“
BLUE
”
“
RED
”
4. To return to the normal operation screen, press a key
other than the power switch or
PTT
.
Press and hold