51
y
96 POSITION COMMENT
Set up the position comment function.
Setting Item:
Off Duty / En Route / In Service / Returning / Committed / Special / Priority/
Custom 0 / Custom 1 / Custom 2 / Custom 3 / Custom 4 / Custom 5 /
Custom 6 / Emergency!
Default:
Off Duty
Explanation:
Select the position comment (standard message) incorporated into
beacons of your station.
Unless there is a serious emergency, such as an accident or natural disaster,
do not select
[
EMERGENCY!
]
.
y
97 SmartBeaconing
Settings for SmartBeaconing
Setting Item:
STATUS:
OFF / TYPE1 / TYPE2 / TYPE3
LOW SPEED: 2 to 30
HIGH SPEED: 3 to 90
SLOW RATE: 1min to 100min
FAST RATE: 10sec to 180sec
TURN ANGLE: 5° to 90°
TURN SLOPE: 1 to 255
TURN TIME: 5sec to 180sec
Default:
STATUS: OFF
STATUS
TYPE1
TYPE2
TYPE3
LOW SPEED
5
5
5
HIGH SPEED
70
70
70
SLOW RATE
30min
30min
30min
FAST RATE
120sec
120sec
120sec
TURN ANGLE
28°
28°
28°
TURN SLOPE
26
26
26
TURN TIME
30sec
30sec
30sec
Explanation:
SmartBeaconing™ is a function that efficiently transmits an APRS beacon including your
own station position, speed and direction of travel. The information is based on data from
a GPS satellite receiver unit.
Set STATUS to TYPE1, TYPE2 or TYPE3; set [
93 MY POSITION SET
] to “GPS”; and set
the “
AUTO
” unser [
82 BEACON TX SET
] to “SMART” to activate the SmartBeaconing
TM
function.
STATUS: SmartBeaconing
TM
only operates when STATUS is set to TYPE1, TYPE2,
or TYPE3.
Set STATUS to OFF to deactivate SmartBeacon
TM
.
The transceiver's SmartBeaconing feature has three identical default
settings (TYPE 1 through TYPE 3) that you can change and save to suit
your situation.
