43
CALL RINGER:
OFF
RANGE RINGER: OFF
MSG VOICE:
OFF
Explanation:
Set the bell sound for transmit/receive of APRS beacons and messages and the conditions
for when it rings.
•
TX BEACON:
This sets the bell ring when your own station is sending a beacon.
When set to ON, a bell will ring prior to the transmission.
•
TX MESSAGE: This sets the bell ring when your own station is sending
a message. When set to ON, a bell will ring prior to the
transmission.
•
RX BEACON:
This sets the bell ring when a beacon is received from another
station. When set to ON, a bell will ring when a beacon is received.
•
RX MESSAGE:
This sets the bell ring when a message is received from another
station. When set to ON, a bell will ring when a message is received.
•
MY PACKET:
This sets the bell ring when your own station transmit beacon
(relayed signal) is received.
•
CALL RINGER:
A bell will ring when a beacon from a station whose callsign is set
using [
77 APRS RINGER (CS)
] in the set-up menu is received.
•
RANGE RINGER: A special bell will ring when a beacon located close to your own
station is received. When distance is selected, a special bell
will ring when a beacon from a station closer than the distance
set is received. When OFF is selected, the distance will not be
determined.
•
MSG VOICE:
Read out the message content. When set to ON, the message
contents (callsign and main text) are read out when a message
is received (the optional voice guide unit FVS-2 is required).
y
77 APRS RINGER (CS)
Callsign setting for CALL RINGER
Setting Items:
-NN
: Callsign (a maximum of 6 characters)
NN: SSID (a number between one and 15 or nil)
Explanation:
Turn “
CALL RINGER
” under [
76 APRS RINGER
] in the set-up menu to ON to set the
callsign of the station which will ring the special bell. A maximum of up to 8 callsigns can
be set.
