31
Receiving messages
When a message is received, a pop-up screen appears, together with a audio alarm,
followed by the screen below.
Hello! every member
|
||||||||||||||||||||
||||||||||||||||||||
|||||||
1 From:JA1YPC- 7
MESSAGE :12
[
2022/02/03 12:34
]
Tips
•
A alarm will sound when a message ACK is received and the “AM>(callsign)” will be displayed on
the screen.
•
A alarm will sound when a message REJ (reject) is received and the “RM>(callsign)” will be displayed
on the screen.
Filter setting for messages received
The group filter for receiving messages and bulletin messages from specific groups (ALL,
CQ, QST, YAESU etc.) can be set.
1
Press and hold the [
F menu
] key → [
91 MESSAGE GROUP
] → Press the
DIAL
knob.
2
Rotate the
DIAL
knob to select the group filter, then press the
DIAL
knob.
GROUP 1: ALL
GROUP 2: CQ
GROUP 3: QST
GROUP 4: YAESU
GROUP 5: –––––––––
GROUP 6: –––––––––
BULLETIN 1: BLN?
BULLETIN 2: BLN?
BULLETIN 3: BLN?
“GROUP 1: ALL”, “GROUP 2: CQ”, “GROUP 3: QST”, “GROUP 4: YAESU”, “GROUP
5 (any)” and “GROUP 6 (any)” can be selected for the group code. For bulletin,
“BULLETIN 1” to “BULLETIN 3” can be selected.
3
Enter the text.
Refer to “Text input screen” (FTM-200DR/DE Operating Manual) on how to enter text.
A maximum of up to 9 characters can be entered.
4
Press and hold
DIAL
knob.
5
Press the [
DISP
] key or press the
PTT
switch to return to the operating screen.
When a group or bulletin message is received, screens like the following are displayed:
