Memory Set Mode
Press and hold the
key for one second to enter the Memory Channel Set Mode.
Clock/Timer Set Mode
Press and hold the [
VOL/SEL
] key for one second to enter to the Clock/Timer Set Mode while the clock/timer
function is activated.
Smart Menu Key
Top panel
/
keys, and the
key select and enable operation of the following features.
Display
T 1
TIME ADJ
T 2
CLOCK BP
T 3
T FORMAT
T 4
12H
/
24H
T 5
TMR BEEP
T 6
APO
Function
Set up the Clock.
Set an alarm beep which will sound every “00” minutes.
Change the Clock Format.
Change the Time System.
Stop Watch Timer allows programming a timed interval when a beep will sound and
the white LED will flash.
Selects the Automatic Power Off time (time before power goes off).
Page
53
84
83
84
84
85
Page
25
26
27
27
27
27
27
28
28
29
29
30
31
30
32
32
32
Function
Press the
key to activate the AF Dual function.
Press the
key to activate the ARTS feature.
Press the
key to enable adjustment of the display illumination level by the DIAL knob.
Press the PTT switch to activate the sound of a Gong Bell.
Press the PTT switch to activate the sound of a UFO in flight.
Press the PTT switch to activate the sound of a klaxon.
Press the PTT switch to activate the sound of a siren.
Press the
key to activate the Intercom mode.
Press the
key to disable noise and tone squelch.
Press the PTT switch to route your amplified voice through the PA speaker.
Press the
key to activate the Reverse feature.
Press the
key to activate the scanner.
Press the
key to activate the Smart Search.
Press the
key to enable adjustment of the noise squelch threshold level by the DIAL knob.
Press the
key to activate the 1750 Hz Tone Burst.
Press the
key to change the transmit power level.
Press the
key to change the receiver audio level of the intercom receiver.
Display
AF DUAL
ARTS
DIMMER
HORN 1
HORN 2
HORN 3
HORN 4
INTERCOM
MONI
PA
REVERSE
SCAN
SQL LEVL
SSCH
TCALL
TX POWER
VOL.ITCOM
When one of the above features does not appear in the list, it is because that feature is not assigned to the top panel
/
keys. Please insure the Smart Menu “
F14 FKEY MOD
” is set to “
FNC
” or “
FNC+MSG
”.
Display
M 1
GROUP
M 2
MEM CH
M 3
MEM SORT
M 4
MEM TAG
M 5
SCN TYPE
M 6
SKIPONLY
M 7
SQL LEVL
M 8
SQL TSQF
M 9
SQL DCS
M10
SQL TYPE
M11
TX SHIFT
M12
TX POWER
M13
DELETE
Page
36
37
37
38
39
39
40
40
41
41
42
43
43
Function
Assigns/Eliminates the memory channel to/from the Memory Group Memory bank.
Changes the memory channel number to the desired vacant memory channel number.
Sorts and renumbers the Memory Channels by frequency, from low to high.
Appends an Alphanumeric “Tag” (label) to a memory channel.
Sets the Scan Type (Skip Memory or Preferential Memory).
Set the Preferential Scan List.
Sets the Squelch Threshold Level.
Change the CTCSS Tone Frequency.
Change the DCS Code.
Change the Squelch Type (CTCSS or DCS).
Stores an independent (in band) transmit frequency (Odd Split).
Change the Transmitter Power Level.
Deletes memorized data (except CLUB memory channel).
