Yaesu FTM-10E, Technical Supplement, Page: 15 / 64

15
FTM-10R/E Technical Supplement
UHF S-Meter Calibration
1. Set the RF signal generator to 440.050 MHz. Set the
generator for ±3.5 kHz deviation of a 1 kHz modula-
tion tone, and set the RF output level from the signal
generator to -5 dB
μ .
2. Press the key repeatedly to display the fre-
quency.
3. Set the transceiver frequency to 440.050 MHz.
4. Press and hold the
key for one second to
enter the Menu mode.
5. Rotate the DIAL knob to select Menu Item "
F29 RX M F29 RX M F29 RX M F29 RX M F29 RX M
MODE MODE MODE MODE MODE
".
6. Press the
    
key, then rotate the DIAL knob to select
"
FM
".
7. Press the key to save the new setting and
exit the Menu mode.
8. Press the key repeatedly to display the
Alignment Menu.
9. Press the
    
key repeatedly to select Alignment Menu
Item "
A-7 SM U A-7 SM U A-7 SM U A-7 SM U A-7 SM U
/
D D D D D
".
10.Press the
    
key to save the new setting.
11.Increase the output level of the signal generator up to
+23dB μ .
12.Press the
    
key to save the new setting.
13.Press the key repeatedly to display the fre-
quency.
14.Press and hold the key for one second to
enter the Menu mode.
15.Rotate the DIAL knob to select Menu Item "
F29 RX M F29 RX M F29 RX M F29 RX M F29 RX M
MODE MODE MODE MODE MODE
".
16.Press the
    
key, then rotate the DIAL knob to select
"
WIDE FM
".
17.Press the key to save the new setting and
exit the Menu mode.
18.Press the key repeatedly to display the
Alignment Menu.
19.Press the
    
key repeatedly to select Alignment Menu
Item "
A-7 SM U A-7 SM U A-7 SM U A-7 SM U A-7 SM U
/
D D D D D
".
20.Press the
    
key to save the new setting.
21.Increase the output level of the signal generator up to
0 dB μ .
22.Press the
    
key to save the new setting.
Squelch Adjustment
1. Set the RF signal generator to 146.050 MHz. Set the
generator for ±3.5 kHz deviation of a 1 kHz modula-
tion tone, and set the RF output level from the signal
generator to -12 dB
μ V.
2. Press the key repeatedly to display the fre-
quency.
3. Set the transceiver frequency to 146.050 MHz.
4. Press and hold the
key for one second to
enter the Menu mode.
5. Rotate the DIAL knob to select Menu Item "
F29 RX M F29 RX M F29 RX M F29 RX M F29 RX M
MODE MODE MODE MODE MODE
".
6. Press the
    
key, then rotate the DIAL knob to select
"
FM
".
7. Press the key to save the new setting and
exit the Menu mode.
8. Press the key repeatedly to display the
Alignment Menu.
9. Press the
    
key repeatedly to select Alignment Menu
Item "
A-8 SQL U A-8 SQL U A-8 SQL U A-8 SQL U A-8 SQL U
/
D D D D D
".
10.Press the
    
key to save the new setting.
11.Increase the output level of the signal generator up to
-4 dB μ V.
12.Press the
    
key to save the new setting.
13.Press the key repeatedly to display the fre-
quency.
14.Press and hold the key for one second to
enter the Menu mode.
15.Rotate the DIAL knob to select Menu Item "
F29 RX M F29 RX M F29 RX M F29 RX M F29 RX M
MODE MODE MODE MODE MODE
".
16.Press the
    
key, then rotate the DIAL knob to select
"
WIDE FM
".
17.Press the key to save the new setting and
exit the Menu mode.
18.Press the key repeatedly to display the
Alignment Menu.
19.Press the
    
key repeatedly to select Alignment Menu
Item "
A-8 SQL LEVL A-8 SQL LEVL A-8 SQL LEVL A-8 SQL LEVL A-8 SQL LEVL
".
20.Increase the output level of the signal generator up to
-1 dB μ V.
21.Press the
    
key to save the new setting.
22.Increase the output level of the signal generator up to
+7 dB μ V.
23.Press the
    
key to save the new setting.
24.Press the key to save the new setting and
exit the Alignment Menu mode.
Alignment