15
Connecting to a Faraway Station Using WIRES-X
Releasing the WIRES-X connection
Pressing and holding
for over one second switches the screen to the frequency
display screen, and
[
X ]
displayed on the left side of the frequency display disappears.
Tip
The local node and the node or room remain connected.
Connecting to analog nodes
When the node you want to connect to is an analog station, use the DTMF function on
the transceiver. For details on how to use the DTMF function, refer to “Using the DTMF
function” in the basic operating manual.
Connecting to nodes or rooms on the Internet
1
Set the main band frequency to the local node frequency.
2
Press
to switch to analog FM mode.
Tip
For details, refer to “Selecting communication mode” in the basic operating manual.
3
In the Setup menu from
[4 SIGNALING]
→
[3 AUTO DIALER]
, select “OFF”.
Tip
For details refer to “Transmitting the DTMF code manually” in the basic operating manual.
4
While pressing
[PTT]
on the microphone, press
[0]
to
[9]
,
[*]
,
[#]
,
[A]
to
[D]
.
Transmits the DTMF code.
5
Release
[PTT]
, and keep the transceiver in reception
mode for about 10 seconds.
Once connection is successfully established, you will be
able to hear audio.
Caution
The connection destination screen does not appear.
LOCK
P3
P2
P1
7
1
4
8
2
0
5
9
B
A
C
D
3
6
P4
LAMP
DTMF MICROPHONE
MH-48
ABC
JKL
TUV
GHI
PQRS
DEF
MNO
WXYZ
MIC
Tip
You can store DTMF codes consisting of up to 16 digits for 9 channels on the transceiver. If you register
the codes of frequently-used connection destinations in advance, you can easily transmit a code by
pressing its abbreviated number while pressing
[PTT]
.
For details, refer to “Using the DTMF Function”
in the basic operating manual.
