29
Other On-Screen Indications
BUSY
:
Lights up while receiving a signal.
TX
:
Lights up during transmission.
+
:
Lights in plus shift (repeater operation).
-
:
Lights in negative shift (repeater opera-
tion).
ENC
:
Lights when the tone encoder is operat-
ing.
TSQ
:
Lights during tone squelch operation.
CLAR TRX
: Lights when the TRX clarifier is in opera
-
tion.
CLAR TX
: Lights up during TX clarifier operation.
CLAR RX
: Lights up during RX clarifier operation.
+ xxx Hz /-xxx Hz
:
Displays the offset amount of the clarifier.
HI-SWR
:
A warning display to indicate an antenna
system error.
VFO
:
Lights in VFO mode.
M-xx
:
Displays the selected channel number in
memory mode.
MT
:
Lights up during memory tuning opera-
tion.
QMB
:
Lights up during operation with quick
memory.
PMS
:
Lights up during programmable memory
scan operation.
EMG
:
Emergency call set frequency call lights
up.
LSB / USB / CW-L / CW-U / AM / AM-N / FM / FM-N /
DATA-L / DATA-U / DATA-FM /D-FM-N /
RTTY-L / RTTY-U / PSK
:
Displays the selected radio emission
type.
About TFT Displays
FTDX101 series utilizes a TFT liquid-crystal display.
Although TFT liquid-crystal displays are made using very precise technology, they are prone to
develop dead pixels (dark dot) or pixels that are always on (bright dot). Please understand that
such phenomena do not constitute product defects or malfunctions. Rather, this phenomena
occurs due to limitations in the manufacturing technology with respect to TFT liquid-crystal dis-
plays.
•
Depending on the viewing angle, unevenness in color or brightness may occur. Please note that
any unevenness observed is inherent to the construction of TFT liquid crystal displays and there-
fore does not constitute a product defect or malfunction.
•
If your TFT liquid-crystal display becomes dirty, please use a dry soft cloth or tissue to wipe the
display clean. Use of glass cleaner, household cleaners, organic solvents, alcohol, abrasives,
and/or like substance may damage the TFT liquid-crystal display.
