Yaesu FTDX10, Operation Manual

Page: 30 / 123

29
Other display settings
• Screen Saver
A Screensaver, to prevent burning of the TFT
screen will operate after a set time, if no trans-
ceiver function is operated.
1. Press the [FUNC] knob.
2. Touch [DISPLAY SETTING] or rotate the
[FUNC] knob to select [DISPLAY SETTING]
and then press the [FUNC] knob.
3 . T o u c h [DISPLAY] → [SCREEN SAVER]
or rotate the [FUNC] knob to select an item
and press the [FUNC] knob.
4. Rotate the [FUNC] knob, or touch “<” or “>”
on either side of the value to select the time
until the screen saver is employed (default
setting is 60 min).
OFF Screensaver is not employed.
15min Screensaver activates after 15 minutes.
30min Screensaver activates after 30 minutes.
60min Screensaver activates after 60 minutes.
5. Press the [FUNC] knob to save the new set-
ting.
6. Touch [BACK] several times to return to nor-
mal operation.
• Inputting the Call Sign
Registered call signs names, and characters can
be displayed on the opening screen when the
power is turned ON.
1. Press the [FUNC] knob.
2. Touch [DISPLAY SETTING] or rotate the
[FUNC] knob to select [DISPLAY SETTING]
and then press the [FUNC] knob.
3. Touch [DISPLAY] → [MY CALL] or rotate the
[FUNC] knob to select the item and press the
[FUNC] knob.
4. Touch a character key. The touched character
will be displayed at the top of the screen. En-
ter each character of your call sign.
Up to 12 characters (letters, numbers, and
symbols) can be entered.
Caps
The input switches between lower and up-
per-case letters each time this symbol is
touched.
One character to the left of the cursor is
erased when this symbol is touched.
BACK
The display returns to the previous screen
when this symbol is touched.