25
• FIX
To use Fixed Mode, enter the start frequency of the
scope.
Display area start frequency
Marker* (Reception Frequency)
Marker* (Transmit Frequency)
Current display mode (FIX)
Sweep Speed
Scope Screen frequency span (display range).
The upper limit frequency of the display area.
*At factory shipment, marker display is ON.
FIX is displayed at the top of the scope screen.
Press and hold [FIX] while FIX is displayed, the fre-
quency input screen will be displayed, and the start
frequency can be entered:
Example:
To enter 7.000.000 MHz
[0]→[7]→[ENT] or [7]→[.]→[ENT]
To enter 7.030.000 MHz
[7]→[.]→[0]→[3]→[ENT]
•
3DSS
Switch between the 3DSS display and the waterfall
display.
The display will change each time it is touched:
3DSS type
Waterfall type
Each time the Waterfall Display is touched,
the size of the display changes as follows.
à
à
•
MULTI
In addition to the scope display, the oscilloscope
and AF-FFT are also presented.
Touch again to return to the original screen.
Touch this area to set the attenuator.
Touch this area to set the level and sweep speed.
Summary of Contents for FTDX10
Page 1: ...Operation Manual...
