DISPLAY SETTING
- SCOPE -
RBW
Function: Sets the resolution of Spectrum Scope
display.
Available Values: HIGH / MID / LOW
Default Setting: HIGH
Description: When set to HIGH, the image is
finely divided.
SCOPE CTR
Function: Sets the scope screen center and
marker position.
Available Values: FILTER / CARRIER
Default Setting: CARRIER
Description:
FILTER:
Relative to the center of the filter.
CAR PO
INT: Based on signal carrier points.
2D DISP SENSITIVITY
Function: Change the Waterfall Display sensitiv-
ity.
Available Values: NORMAL / HI
Default Setting: HI
Description:
NORMAL: Display at normal sensitivity.
HI:
Display at high sensitivity.
3DSS DISP SENSITIVITY
Function: Change the 3DSS Display sensitivity.
Available Values: NORMAL / HI
Default Setting: HI
Description:
NORMAL: Display at normal sensitivity.
HI:
Display at high sensitivity.
DISPLAY SETTING
- EXT MONITOR -
EXT DISPLAY
Function: Video signal output setting of the EXT-
DISPLAY terminal on the rear panel.
Available Values: OFF / ON
Default Setting: OFF
Description:
OFF: No video signal output.
ON: Video signal is output.
PIXEL
Function: Select the screen resolution of the ex-
ternal video monitor.
Available Values: 800x480 / 800x600
Default Setting: 800x480
EXTENSION SETTING
- DATE & TIME -
DAY
Set the date (Day).
MONTH
Set the date (Month).
YEAR
Set the date (Year).
HOUR
Set the time (Hour).
Set to 24-hour format.
MINUTE
Set the time (Minute).
106
Summary of Contents for FTDX10
Page 1: ...Operation Manual...