Yaesu FTA-450L Operating Manual Download

Page: 54 / 96

Memory Operation

The

FTA-750L/FTA-550/FTA-450L

provide 200 user-

programmable memories which can hold sets of infor-

mation about channels such as its channel frequency,

position information, channel tag (name) up to 15 char-

acters, and flag (marking for search refinement).

The stored channels can be assigned to ALL, FLAG or

GP1-GP8, which can be named with up to 10 characters.
The

FTA-750L/FTA-550/FTA-450L

’s memory system

allows you to store, label, and recall channel frequencies

you may use frequently.

Recalling the Memories

1. Press the [

MENU

] key to display the

screen.

2. Select “

MEMORY

” on

the screen by pressing

the [

◄

] or [

►

] key, and

then press the [

ENT

]

key.

3. Select a group that the

desired channel belongs

to, by pressing the [

◄

]

or [

►

] key followed by

the [

ENT

] key.

GROUP

ALL

FLAG

GP1:GROUP1

GP2:GROUP2

GP3:GROUP3

MEMORY BOOK



The memory channels belong to either of the fol-

lowing groups.

ALL

... Group including all the memory channels

FLAG

... Group of memory channels you have set

the item “

Flag

” when storing

GP1 to GP8

... Groups of memory channels that

you can set “GP1” to “GP8” when

storing.

Summary of Contents for FTA-450L

































































































Search results

Summary of Contents for FTA-450L

Reviews:

Related manuals for FTA-450L

Brands by name

Popular brands

Yaesu FTA-450L, Operating Manual

Search results

Summary of Contents for FTA-450L

Reviews:

Related manuals for FTA-450L

Brands by name

Popular brands