Yaesu FTA-450L Operating Manual Download

Page: 26 / 96

Basic Operation

Transmission (COM Band)



To transmit, press and

hold the

PTT

switch.

Speak into the micro-

phone area of the front

panel grille in a normal

voice level.

The “

” icon, which

indicates that the

FTA-

750L/FTA-550/FTA-

450L

are in the transmit

mode, appears on the

display.

PTT

SQL

127.300

VOL



To return to the receive mode, release the

PTT

switch.

Operating Advice: Use of Internal Microphone

Your

FTA-750L/FTA-550/FTA-450L

are sealed against water ingress, which includes

waterproof seals around the microphone and speaker enclosure. This requires that you

focus your speech in the direction of the microphone’s location, so as to ensure suf-

ficient voice input to the radio. Refer to the illustration and observe the location of the

internal microphone.

If you find it difficult to utilize the

FTA-750L/FTA-550/FTA-450L

conveniently and

safely while speaking directly into the microphone, we recommend the use of the

SSM-

10A

Speaker/Microphone (option), or an aftermarket aviation headset with boom mi-

crophone.

Summary of Contents for FTA-450L

































































































Search results

Summary of Contents for FTA-450L

Reviews:

Related manuals for FTA-450L

Brands by name

Popular brands

Yaesu FTA-450L, Operating Manual

Search results

Summary of Contents for FTA-450L

Reviews:

Related manuals for FTA-450L

Brands by name

Popular brands