16
Memory Function
Memory Channel List
Since memory channels are displayed in a list, you can easily recall the memory by
checking the frequency and memory tag display.
1. Press the [
F
MENU
] key
[
MEMORY
]
.
• If [
MEMORY
] is not displayed, touch [
FWD →
] to
display [
MEMORY
] and then touch it.
• You can switch between memory tag display and
frequency display by press and hold the [
V/M •
] key.
• The “ ” icon is displayed at the left of memory channels
set as skip memory, and the “ ” icon is displayed at the
left of memory channels set as specified memory.
• Deleted memory channels are displayed in gray text.
• Touching [
], will cause the 10 digits of the memory
channel to blink. Then turning the DIAL knob will fast
forward memories in 10 channel steps. To cancel fast
forward, touch [
] again.
2 439.700.00
3 145.620.00
4 432.500.00
1 145.030.00
2. Rotate the DIAL knob to select the desired memory channel.
3. Touch [
ENT
] to recall the selected memory channel and enter memory mode.
The Memory Channel Only Mode
The FT5DR/DE may be set to operated only in the registered memory channels.
1. While pressing the [
V/M •
] key, press and hold the POWER switch to turn the
transceiver
ON
.
• The memory channel only mode is ON, the previously selected memory channel is
recalled.
• Rotate the DIAL knob to select the memory channels.
• Touch and hold the frequency display to display the numeric keypad, enter a 3-digit
memory channel number, and then touch [
ENT
] to recall the memory channel.
• In the memory only mode, only the following functions will operate:
• Changing the communication mode (touch [
MODE
])
• The transmission mode setting of the AMS function (touch [
TX AUTO
], [
TX FM
] or [
TX DN
])
• Switching MAG groups (press the [
BAND
] key)
• Audio level adjustment
• Key lock function (press the
POWER
switch)
• Function menu MEMORY, DISP, LED LIGHT, SCAN, and D.RCV functions
• SQL level adjustment (press the [
SQL
] key)
• Group monitor (GM) function (press the [
GM
] key)
• WIRES-X function (press the [
X
] key)
• Pressing the [
V/M •
] key, will sound the beep, “
M-ONLY
” will be displayed, and the
function will not operate.
z
Canceling Memory Only Mode
1. Turn the transceiver
OFF
; and then while pressing the [
V/M •
] key, press and hold the
POWER
switch to turn the transceiver
ON
.
