
4
Digital Personal ID (DP-ID) feature
About the Digital Personal ID (DP-ID) feature
When operating in digital C4FM communications, each transceiver is programmed with,
and sends its own individual ID information (Radio ID) in each transmission. The DP-ID
function and the individual identification information, makes possible group communica-
tions of stations that are within communications range.
Digital Personal ID (DP-ID) feature opens the speaker audio only when a signal set to
the same DP-ID in the Digital Mode is received, even if each transceiver is set a differ-
ent Digital Group ID (DG-ID) number.
The digital C4FM repeater equipped with the DP-ID function allows preferentially contact
in an emergency, regardless of the repeater setting or if the repeater is being used with-
out the DG-ID setting.
•
Digital C4FM mode transceivers compatible with the DG-ID function are required in order
to utilize this function.
•
If the firmware is not compatible with the DG-ID function, update to the latest firmware to
use the DG-ID function. The latest firmware is available on the YAESU website.
Registering the DP-ID of the other station
•
Once registered, DP-ID is stored until deleted.
•
Register with each other's transceivers nearby.
•
When setting the DG-ID code to “00”, the transceiver will receive signals from all digital
C4FM stations. To utilize the DP-ID function, it is necessary to set the receive DG-ID code
to a number other than “00”.
1. Press and hold the [
DISP
] key
touch [
GM
]
touch [
1 DP-ID LIST
].
•
The DP-ID list is displayed.
•
If a number of DP-IDs are registered, rotate the
DIAL
knob to display the desired DP-ID.
2. A transmission in the digital C4FM mode from the other
transceiver will register the DP-ID.
When a signal from the other station is received, the
callsign and “
REGISTRATION?
” are displayed on the
LCD.
•
When a signal from another registered transceiver is
received, nothing is display on the LCD.
•
When registering a transceiver already registered
with a different call sign, the call sign registered in the
DP-ID list is changed to the new registered call sign.
W6DXC
REGISTRATION?