51
④
Connecting to the node or room you have most recently connected
1. If you have previously connected to a node ID or a room ID on the Internet, it
appears in gray at the bottom of the screen.
• Press the
PTT
switch or touch the ID to connect to the previous connection
destination. When you connect, the connection destination is displayed in
white.
• If connection is unsuccessful, an error message appears and the name flash-
es again.
Ჸ Ჸ
/ 76'
5%12'
/
8
5 3 .
; # ' 5 7 6 5 7 4 +
5*+0#)#9#-7
, 3 ; $ ( 6 +
; # ' 5 7 6 7 4 +
+ & 6 4 :
⑤
Entering the DTMF ID number (5 digits) of the node or the room
1. Press and hold the [
#
] key on the microphone.
Displays the DTMF ID input screen.
2. Enter the 5-digit DTMF ID.
3. Press the [
#
] key on the microphone to start a connection.
• Once connection is successfully established, “
Connected
” will appear on the LCD.
• If connection is unsuccessful, an error message appears and the screen returns to the DTMF ID input
screen.
• Press the [
] key on the microphone to cancel the DTMF input screen.
