Yaesu FT DX 9000D TFT, Operation Manual, Page: 13 / 52

FT
DX
9000 TFT O
PERATION
M
ANUAL
Page 11
H
OW TO
U
SE THE
W
ORLD
C
LOCK
OFF T
IMER AND
A
LARM
S
ETUP
It is easy to set the OFF Timer and Alarm times.
As to the OFF TIMEER, countdown intervals of 120/90/60/30/15 minutes, and OFF, can be selected.
For the alarm setting, it is possible to choose either LOCAL-TIME1 or LOCAL-TIME2, set the alarm time, set the
Alarm ON or OFF, and/or sound the alarm one time only or every day.
1. On the World Map screen, press the [ F5
](
TIMER
)
key to move to the OFF TIMER and ALARM setup
screen.
2. Press the [ F1
]( ), [
F2
]( ), [
F3
]( ), [
F4
]( ) key
to move the cursor to the desired setup item; the
selected item will be highlighted.
OFF TIMER setup:
120/90/60/30/15 minutes, and OFF
ALARM setup:
(When setting up the Alarm, be sure to set the
OFF TIMER setting to OFF!)
TIME ZONE (LOCAL TIME-1/LOCAL TIME-2)
ALARM TIME
ALARM ON/OFF
CYCLE (ONCE/DAILY)
3. Press and hold in [ F7
](
SELECT
) key for 2 sec-
onds to close and exit.
Advice : When the OFF timer is engaged (power is
shut off), the condition of the radio is the same as if
the power switch on the front panel has been turned
off. The Main power (circuit breaker) is not turned
off. Therefore, power to the OCXO will be Maintained,
retaining the high frequency stability.
The Alarm will ring for around 60 seconds. If you want
to stop the alarm, press any of the keys located on
the front panel.
“TIMER” Select
OFF T
IMER AND
A
LARM
S
ETUP
P
AGE