Page 127
FT-950 O
PERATING
M
ANUAL
S
PECIFICATIONS
Receiver
Circuit Type
:
Triple-conversion Superheterodyne
Intermediate Frequencies
:
69.450 MHz/450 kHz/30 kHz (24 kHz for AM/FM)
Sensitivity
:
SSB (BW: 2.4 kHz, 10 dB S+N/N)
4
μ
V (0.5 - 1.8 MHz) (IPO “ON”)
0.2
μ
V (1.8 - 30 MHz) (RF AMP 2 “ON”)
0.125
μ
V (50 - 54 MHz) (RF AMP 2 “ON”)
AM (BW: 6 kHz, 10 dB S+N/N, 30 % modulation @400 Hz)
28
μ
V (0.5 - 1.8 MHz) (IPO “ON”)
2
μ
V (1.8 - 30 MHz) (RF AMP 2 “ON”)
1
μ
V (50 - 54 MHz) (RF AMP 2 “ON”)
FM (BW: 15 kHz, 12 dB SINAD)
0.5
μ
V (28 - 30 MHz) (RF AMP 2 “ON”)
0.35
μ
V (50 - 54 MHz) (RF AMP 2 “ON”)
There is no specification for frequency ranges not listed.
Squelch Sensitivity
:
SSB/CW/AM
(RF AMP 2 “ON”)
2
μ
V (0.1 - 1.8 MHz)
2
μ
V (50 - 54 MHz)
FM
1
μ
V (28 - 30 MHz)
1
μ
V (50 - 54 MHz)
There is no specification for frequency ranges not listed.
Selectivity
(WIDTH: Center):
Mode
–6 dB
–60 dB
CW/RTTY/PKT
0.5 kHz or better
750 Hz or less
SSB
2.4 kHz or better
3.6 kHz or less
AM
6 kHz or better
15 kHz or less
FM
15 kHz or better
25 kHz or less
Image Rejection
:
70 dB or better (160 - 10m Amateur bands)
60 dB or better (6m Amateur band)
Maximum Audio Output
:
2.5 W into 4 Ohms with 10% THD
Audio Output Impedance
:
4 to 8 Ohms (4 Ohms: nominal)
Conducted Radiation
:
Less than 4 nW
Specifications are subject to change, in the interest of technical improvement, without notice or obligation, and are
guaranteed only within the amateur bands.