76
FT-7900R O
PERATING
M
ANUAL
Menu #39
[
SHIFT
]
Function
: Sets the magnitude of the Repeater Shift.
Available Values
: 0.00 - 99.95 MHz (50 kHz step)
Default
: Depends on the band of operation.
Menu #40
[
SKIP
]
Function
: Selects what action will happen on a “flagged” Memory Channel
Available Values
: OFF/SKIP/ONLY
Default
: OFF
OFF:
All memory channels will be scanned (the “flag” will be ignored).
SKIP: The scanner will “skip” the flagged (“SKIP”) channels during scanning.
ONLY: The scanner will only scan the flagged (Preferential) channels during scanning.
Menu #41
[
SPLIT
]
Function
: Enables/Disables split CTCSS/DCS coding.
Available Values
: SPL.OFF/SPL.ON
Default
: SPL.OFF
When this Menu Item is set to “ON,” you can see the following additional parameters after
the “DCS” parameter while selecting the Menu #42: SQL.TYP.
D
D
D
D
D
:
DCS Encode only
(the “
DCS
” icon will blink during operation)
ENC DCS
ENC DCS
ENC DCS
ENC DCS
ENC DCS
: Encodes a CTCSS Tone and Decodes a DCS code
(the “
DCS
” and “
ENC
” icons will appear during operation)
D-DEC
D-DEC
D-DEC
D-DEC
D-DEC
:
Encodes a DCS code and Decodes a CTCSS Tone
(the “
DCS
” icon will blink and the “
DEC
” icon will appear during opera-
tion)
Select the desired operating mode from the selections shown above.
Menu #42
[
SQL.TYP
]
Function
: Selects the Tone Encoder and/or Decoder mode.
Available Values
: OFF/ENC/ENCDEC/REV TN/DCS
Default
: OFF
ENC:
CTCSS Encoder
ENC DEC: CTCSS Encoder/Decoder
REV TN:
Reverse CTCSS Decoder
DCS:
Digital Code Squelch Encoder/Decoder
M
ENU
(
“S
ET
”
)
M
ODE