VFO
Edit the VFO configurations for each band on this page template.
About the setting items of VFO frequencies
• Receive Frequency
Enter the VFO frequencies for each band. The FT-70DR default Frequencies are pre-entered into the
ADMS-10 standard template.
A frequency that is out of the transceiver’s range cannot be entered. When the error pop-up window is
opened, enter the correct frequency.
• Transmit Frequency
The transmit frequency display is grayed out, and it will be set automatically, in accordance with the re-
ceive, and the offset frequencies.
• Offset Frequency
When a transmit frequency is not entered, transmission will be performed at a frequency obtained by
adding/subtracting the offset frequency to/from the receive frequency.
• Offset Direction
Set the frequency shift direction.
OFF:
The transmit frequency is not shifted.
-RPT:
The transmit frequency is shifted to the minus offset.
+RPT:
The transmit frequency is shifted to the plus offset.
24
ADMS-10 Instruction Manual
Summary of Contents for FT-70DE
Page 32: ......
