FT-65R/FT-65E Advance Manual
16
Memory Only Mode
Once memory channel programming has been completed, the transceiver may be placed
in a “Memory Only” mode, whereby VFO operation is impossible.
1. Turn the transceiver
OFF
.
2. Press and hold the
MONI/T.CALL
key and the
PTT
switch simultaneously, while turn-
ing the transceiver ON.
When the LCD backlight is on, release the
MONI/T.CALL
key and the
PTT
switch.
3. Press the [▲] or [▼] key to select “
F5:MEM-ONLY
”.
4. Press the
F
key momentarily to complete the procedure.
To return to normal operation, repeat the above power-on procedure.