Yaesu FT-4VR, Operating Manual

Page: 29 / 40

27
No. Set Mode
item
Description
Selectable options
(Options in bold are the
default settings)
8 CW WRT Sets the CW ID during ARTS operation.
ID= _ _ _ _ _ _ (6 characters)
default: blank
9 DC VLT Displays the voltage. (Voltage)
10 DCS.COD Sets the DCS CODE RX and TX.
104 DCS CODEs / OFF
default: 023 R / 023 T
11 DT DLY
Sets the DTMF code transmission delay
time. 50MS / 250MS / 450MS /
750MS / 1000MS
12 DT SET
Selects the DTMF auto dialer memory
channel and edits the DTMF code (Maxi-
mum 16 digits)
d1 – d9
13 DT SPD Sets the DTMF code transmission speed. 50MS / 100MS
14 EDG.BEP
Turns the Band-edge beeper ON/OFF.
While selecting the frequency via the [▲]
or [▼] key. BEP.OFF / BEP. ON
15 LAMP Selects the LCD/Keypad Lamp mode.
5 SEC / 10 SEC / 30 SEC
/ CONT / OFF
16 LED.BSY Turns the TX/BUSY indicator ON/OFF
while receiving signals.
BSY ON
/ BSYOFF
17 LED.TX
Turns the TX/BUSY indicator ON/OFF
while transmitting signals.
TX ON / TXOFF
18 LOCK Configures the lock mode setting.
LK KEY / LK PTT / LK
P+K
19 M/T-CL
Selects the function of the [MONI/T-CALL]
switch.
MONI / TC1750 * / TC2100
/ TC1000 / TC1450
(*: Eurpean / Asian Version)
20 MEM.DEL Deletes the memory channel –
21 MEM. TAG Edits the memory channel tag. –
22 PAG.ABK
Turns the pager answer back Function ON/
OFF
ABK.OFF / ABK. ON
23 PAG.CDR Specifies a personal code (receive). 01 – 05 – 50, 01 – 47 – 50
24 PAG.CDT Specifies a personal code (transmit). 01 – 05 – 50, 01 – 47 – 50
25 PRI.RVT Turns the Priority Revert feature ON/OFF. RVTOFF / RVT ON
26 PSWD Turns the Password feature ON/OFF. PWD.OFF / PWD. ON
27 PSWDWT Inputs the password. (4 digits)