23
Programmed VFO Scan
The scan condition may be selected for VFO scanning.
1. Press the [
#VFO
] key to enter the VFO mode.
2. Press and hold the [
#VFO
] key.
3.
Press the [▲] or [▼] key to select the bandwidth for Programmed VFO
scanning.
Display
Description
BAND
(default setting)
The scanner will sweep frequencies on the current operating band.
+-1MHz
The scanner will sweep ±1 MHz from the operating frequency.
+-2MHz
The scanner will sweep ±2 MHz from the operating frequency.
+-5MHz
The scanner will sweep ±5 MHz from the operating frequency.
ALL
The scanner will sweep all frequencies.
PMS-X
The scanner will sweep frequencies designated by the currently se-
lected PMS (Programmable Memory Scan) frequency pair.
PMS-X will appear in the [
#VFO
] selections after setting a PMS frequency pair.
See the Advance Manual for detail.
Weather Broadcast Channels scan (In the USA)
In the USA, the VHF Weather Broadcast Station Memory Channel Bank has
been pre-programmed at the factory for immediate access to NOAA weather
information stations.
1. Press and hold the [
1
] key to recall the Weather Broadcast Memory Bank.
2.
Press the [▲] or [▼] key to select the desired Weather Broadcast chan
-
nel.
3. To scan for additional or stronger
Weather stations, just press the
PTT
switch (or press and hold the [▲] or
[▼] key).
When the scanner pauses on a
station, press the
PTT
switch once
to halt the scan, or press the
PTT
switch again to restart the scan.
CH
Frequency
CH
Frequency
1
162.550 MHz
6
162.500 MHz
2
162.400 MHz
7
162.525 MHz
3
162.475 MHz
8
161.650 MHz
4
162.425 MHz
9
161.775 MHz
5
162.450 MHz
10
163.275 MHz
4. To return to normal operation, press the [
MR
] key, or press and hold the
[
1
] key again.
Summary of Contents for FT-4VR
Page 1: ...VHF FM TRANSCEIVER Operating Manual FT 4VR FT 4VE...
Page 37: ...35 Note...
Page 38: ...36 Note...
