22
For additional details on the following functions, refer to the Advanced
Manual which may be downloaded from the Yaesu website.
Split Memory
Two different frequencies, one for receive and another for transmit, may be
stored in one memory channel.
Using Memory Tag
Memory name tags may be assigned to the memory channels and home
channels.
Using Memory Bank
The transceiver allows using up to 10 memory banks to allow sorting and reg-
istering the channels in convenient groups.
Scanning Function
The transceiver supports the following four scanning functions:
VFO Scan
Programmed Scan
Memory Channel Scan
Programmable Memory Scan(PMS)
Memory Bank Scan
For additional details on the Programmable Memory Scan (PMS) and Mem-
ory Bank Scan, refer to the Advanced Manual which may be downloaded
from the Yaesu website.
VFO Scan
VFO scan function scans the frequencies, and detects signals.
1. Press and hold the [
] key or [
] key to start
scanning in the VFO mode.
2. Press the
PTT
switch, [▲] or [▼] key to cancel
scanning.
•
If scanning is in operation when the transceiver is turned OFF, then when it is
turned ON again, scanning will resume instantly.
•
To set the transceiver action when scanning stops, see “Setting the Receive
Summary of Contents for FT-4VR
Page 1: ...VHF FM TRANSCEIVER Operating Manual FT 4VR FT 4VE...
Page 37: ...35 Note...
Page 38: ...36 Note...
