manualshive.com logo in svg

Yaesu FT-4VR, Advance Manual, Page: 3 / 35

Share
Download
Yaesu FT-4VR Advance Manual Download Page 3

Contents

How to Skip (Omit) a Channel during Memory Scan Operation ...14
Programmable Memory Channel Scan (PMS) ............................15

Registering to the Programmable Memory Channels ...............15
Performing Programmable Memory Channel Scan ..................15

Dual Receive (DW) Function .......................................................16

Activating the Dual Receive (DW) feature ................................16
Priority Revert Mode .................................................................17

ARTS (Automatic Range Transponder System) ..........................18

Basic ARTS Setup and Operation .............................................18
ARTS Polling Time Options ......................................................19
ARTS Alert Beep Options .........................................................19
CW Identifier Setup ...................................................................19

DTMF Operation ..........................................................................20

Setting the DTMF Memory ........................................................20
Transmitting the Registered DTMF Code .................................21
Manually Transmitting the DTMF Code ....................................21

Customizing Menu Settings and User Preferences (Set Mode) ...22
Setting the Set Mode ...................................................................22
Tables of Set Mode Operations ...................................................23
Cloning ........................................................................................33
Troubleshooting ...........................................................................34

Summary of Contents for FT-4VR




































Reviews:

No comments