FT-25R/FT-25E Advance Manual
17
Memory Only Mode
Once memory channel programming has been completed, the transceiver may be placed
in a “Memory Only” mode, whereby VFO operation is impossible.
1. Turn the transceiver
OFF
.
2. Press and hold the
MONI/T.CALL
key and the
PTT
switch simultaneously, while turn-
ing the transceiver
ON
.
When the LCD backlight is on, release the
MONI/T.CALL
key and the
PTT
switch.
3.
Press the [▲] or [▼] key to select “
F5:MEM-ONLY
”.
4. Press the
F
key momentarily to complete the procedure.
To return to normal operation, repeat the above power-on procedure.
