Yaesu FT-25, Advance Manual

Page: 11 / 39

11
Using the Squelch Feature
FT-25R/FT-25E Advance Manual
Setting DCS CODE number
The DCS code can be selected from 104 types (023 to 754).
1. Press and hold the
F key to enter the Set Mode.
2.
Press the [▲] or [▼] key to select Set Mode Item “
11 DCS CODE ”
3. Press the F key to enable adjustment of this item.
4.
Press the [▲] or [▼] key to select “
TX ” or “ RX ”,
then press the F key.
5.
Press the [▲] or [▼] key to select the desired DCS Code (a three digit number).
Ask the repeater owner/operator if you don’t know the DCS Code; if you are working
simplex, just set up the DCS Code to be the same as that used by your friend(s).
DCS CODE
023 025 026 031 032 036 043 047 051 053
054 065 071 072 073 074 114 115 116 122
125 131 132 134 143 145 152 155 156 162
165 172 174 205 212 223 225 226 243 244
245 246 251 252 255 261 263 265 266 271
274 306 311 315 325 331 332 343 346 351
356 364 365 371 411 412 413 423 431 432
445 446 452 454 455 462 464 465 466 503
506 516 523 526 532 546 565 606 612 624
627 631 632 654 662 664 703 712 723 731
732 734 743 754 – – – – – –
6. When you have made your settings, press the F key to save the desired DCS Code.
7. Press and hold the
F key to move the upper menu contents in the Set Mode.
8. Press the PTT switch to exit to normal operation.
CTCSS/DCS/PAGER/ARTS Bell Operation
During CTCSS Decode, DCS, PAGER, ARTS operation, you may set up the Transceiver
such that a ringing “bell” sound alerts you to the fact that a call is coming in.
1. Press and hold the F key to enter the Set Mode.
2.
Press the [▲] or [▼] key to select Set Mode Item “
6 BELL ”
3. Press the F key to enable adjustment of this item.
4.
Press the [▲] or [▼]key to set the desired number
of Bell rings.
The available choices are “ 1Time ”, “ 3Times ”,
“ 5Times ”, “ 8Times ”, “ CONTINUE ” (continuous
ringing), or “ OFF (default setting) ”.
5. Press the PTT switch to save the new setting and return to normal operation.