DR-1X/XE
Installation Instructions for the DR-1X/XE
RX-UNIT (V1.00t) and DSP firmware (V4.11)
Attention !
Two versions of the update firmware are available. Before in-
stalling the new firmware, please check the firmware version of
the DR-1X/XE referring to Page 2.
r
V1.00m
replaces
V1.00b and any versions
other than
V1.00f which is for Wide-FM operation
r
V1.00t
replaces
V1.00f
for Selectable Wide/Narrow-FM
operation
This firmware update contains the following additional features.
If you are not interested in these features, you may skip this
firmware update.
m
Adjustable Squelch Hysteresis
m
Adjustable Squelch Tail
m
CWID/Voice announcements with stripped PL Tones
* If the DR-1X/XE Repeater has the firmware
V.1.10D
, all these
features and other updates have been already installed, and
you do not need to install this firmware.
YAESU MUSEN CO., LTD.
