System Requirements
Supported Operating Systems
Microsoft
®
Windows
®
10 (32 bit/64 bit)
Microsoft
®
Windows
®
8.1 (32 bit/64 bit)
CPU
The performance of the CPU must satisfy the operating system requirements.
RAM (System Memory)
The capacity of the RAM (system memory) must be more than sufficient to satisfy the operating system
requirements.
HDD (Hard Disk)
The capacity of the HDD must be more than sufficient to satisfy the operating system requirements.
In addition to the memory space required to run the operating system, about 50 MB or more of additional
memory space is required to run the program.
Cables
• When using a USB port on the computer: the optional SCU-20 PC connection cable for USB
(The SCU-20 is included in the optional SCU-40 WIRES X Connection Cable Kit.)
• When using a COM port connection: the optional CT-163 cables
* When using the SCU-20 cable, be sure to install the designated driver before connecting the cable to
the computer.
Necessary PC peripheral interfaces
USB port (USB 1.1 / USB 2.0) or RS-232C interface (COM port)
The flow of a setup of ADMS-13
The procedure when using ADMS-13 for the first time is as follows:
ADMS-13 Programming Software Installation (5 page)
↓
SCU-20 USB Driver Software Installation (7 page)
↓
Connect the FTM-6000R/E and the PC (7 page)
↓
Execute the ADMS-13 (8 page)
↓
To a explanation of operation of the ADMS-13 (8 page)
Trademarks
Microsoft
®
, Windows
®
, Windows
®
8.1 and Windows
®
10 are registered trademarks in the United States and other
countries.
4
