P8
da Vinci Color mini
Function Operation and Instructions
2. Place the filament on the
spool holder.
1. Please cut the filament at 45
angle before auto loading the
filament into the printer. During
loading filament process, the
filament should be straighten at
least 4” of the Filament end as
shown in pictures.
A. Load/unload filaments
Make sure the filament rotates
clockwise when pulled.
Note
3. Tap Filament Load and
Unload in the main screen and
select Filament.
4. Tap Filament.
5. Tap Load.
6. Confirm the operation.
7. Insert the filament into the feed module, it will be automatically
loaded.
8. Check if the temperature of the print head goes up to its operating temperature (Color PLA from
XYZprinting) after the filament is loaded. Once the set temperature is reached, the feeding motor
will feed the filament along the guide tube into the print head.
9. Once filament has extruded
from the print head, the filament
will be successfully loaded.
Tap the screen to confirm and
continue.
Load filaments
A1
Filament
Unloading filaments
A2
Filament
1. Tap Filament Load and
Unload on the main screen.
2. Tap “Unload” and confirm the
operation.
3. Confirm the unloading
operation.
4. When the print head has
been warmed up to 220 °C,
the feeding motor will eject the
filament.
5. When the unloading
operation completes, tap to
confirm.
