Chassis Management Displays
SHOW/MONITOR [SERVER] CHASSIS SLOT LMB COUNTERS
Display local management bus (LMB) counters
The SHOW/MONITOR [SERVER] CHASSIS SLOT LMB COUNTERS
command displays the accumulated values of the LMB counters since
they were last reset to zero. To reset counters to zero, reinitialize the
processor module or use the ZERO COUNTERS command. This display
is most useful for diagnostic purposes, and not for displaying normal
status.
This command displays the LMB counters of the processor module in the
local slot only. You cannot specify other slots in the command line.
Privilege
Level
Show/Nonprivileged Monitor/Privileged
Syntax
SHOW|MONITOR [SERVER] CHASSIS SLOT LMB COUNTERS
Display
The following is a sample LMB counters display:
Xyplex> show chassis slot lmb counters
Local Management Bus Counters
Messages Sent :
43
Messages Received:
89
Transmit Errors:
0
Receive Errors:
0
Xmit/Rcv Conflicts:
0
Receive Length Errors:
0
Invalid Transmit State:
0
Receive Checksum Errors:
0
Watchdog Timeouts:
0
Invalid Receive State:
0
Card in Invalid State:
0
Receive Fragment Errors:
0
Loopback Messages:
0
Abnormal Receive End:
0
Undeliverable Loopbacks:
0
Undeliverable Receives:
0
Loopback Resource Errors:
0
Abnormal Aborts:
0
Abort 1 Resets:
0
Abort 2 Resets:
0
Field
Means
The total number of messages sent from this processor module to the LMB.
Messages Sent
The total number of messages that the processor module has attempted to
send, but failed to send, because of an error.
Transmit
Errors
0020
101