Managing Initialization Parameters
DEFINE [SERVER] CHASSIS SLOT LOADDUMP ENABLED | DISABLED
Enable or disable an initialization record
The DEFINE [SERVER] CHASSIS SLOT LOADDUMP ENABLED |
DISABLED command disables or enables an initialization record.
Notes
Not all initialization records are enabled by default on every product.
Managed concentrators and terminal servers have only the primary
initialization record enabled. LAN bridge/routers have the primary and
secondary initialization record enabled. You must enable the other
initialization records on these products if you want the processor module
to use them. WAN bridge/routers have all three initialization records
enabled by default.
All initialization records have default values for the link selection,
loading and dumping protocols, and the CARD/XMOP/MOP load image
filename whether they are enabled or disabled by default.
You cannot disable all three initialization records. If the primary and
secondary initialization records are disabled, for example, you cannot
disable the tertiary initialization record. If you attempt to do so, the
command processor generates an error message.
Privilege
Level
Privileged
Syntax
DEFINE [SERVER] CHASSIS SLOT [list] LOADDUMP [record|ALL]
DISABLED | ENABLED
Where
Means
One or more chassis slot numbers in the range of 1-15. The local slot is
the default.
[list ]
One or more of the following initialization records:
PRIMARY
SECONDARY
TERTIARY
ALL
The PRIMARY initialization record is the default.
[record]
Enable the initialization records you specify.
ENABLED
0020
77
