Managing Initialization Parameters
DEFINE [SERVER] CHASSIS SLOT LOAD INTERNET ADDRESS
Specify the Internet address of a processor module for DTFTP loading
The DEFINE [SERVER] CHASSIS SLOT LOAD INTERNET ADDRESS
command specifies the Internet address of the module or module set in the
slot you specify for DTFTP loading.
Notes
Use this command if DTFTP is enabled for the software load image. You
must also specify the Internet address of the load host, and the name of the
file that contains the load image. If the processor module gains access to
the load host through a gateway, you must also specify the Internet address
of the gateway. Use the DEFINE CHASSIS SLOT LOAD INTERNET
commands to specify this information.
The Internet address of the processor module appears in the Chassis Slot
Status display. When you define the address for DTFTP loading, it
appears in the Chassis Slot Loaddump Characteristics display.
Privilege
Level
Privileged
Syntax
DEFINE [SERVER] CHASSIS SLOT [list ] LOAD [record|ALL]
INTERNET ADDRESS internet-address
Where
Means
[list ]
One or more chassis slot numbers in the range of 1-15. The slot numbers
you specify here must correspond to the slot numbers where the DTFTP
protocol enabled. The local slot is the default.
One or more of the following initialization records:
PRIMARY
SECONDARY
TERTIARY
ALL
The PRIMARY initialization record is the default.
[record]
The Internet address of the processor module in the slot you specify.
internet-
address
62
0020
